Regulators - EDGUN.SHOP
Menú info@edgun.shop 0
info@edgun.shop

    • Regulators

    Huma-Air Tuning Regulator
    For The Edgun Leshiy

    AGOTADO / PROXIMAMENTE

    Avísame cuando esté disponible:

      1. Your regulator preset to your own wishes.
      2. A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment.
      3. We will include a “Huma-Air regulated” breech sticker.
      1. Easy to adjust due to the clear pressure scale, so need of a regulator tester.
      2. This regulator comes in our middle pressure range to cover all calibers (ca 75-150 bar).
      3. Up to 15-20% more shots with equal power because of the ultra compact build (tested in .25).
      4. Excellent consistency.
      5. Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
        1. Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
        2. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.
        3. This gives our regulators a repeat cycle less than 1% difference.

      Ver todos los detalles del producto »

      Huma-Air Regulator Tester

      AGOTADO / PROXIMAMENTE

      Avísame cuando esté disponible:

      Description: Regulator tester for the professional tuners among us. With our regulator tester device you can test and service our Huma-Air regulators. Check the proper working and cycling, adjust the...

      Ver todos los detalles del producto »

      Edgun Morana Tuning Regulator
      By Huma-Air

      AGOTADO / PROXIMAMENTE

      Avísame cuando esté disponible:

        1. Huma-Air pressure regulator for tuning the Edgun Morana airrifle.
        2. For the Edgun Morana we have designed a replacement Huma Tuning Regulator complete with a volume plenum.
        3. Due to our ultra compact build of our regulator you can remove the large factory regulator body and replace it with our regulator and volume plenum.
        4. The extra regulated volume what is created allows you to achieve the same pellet velocity with a lower regulator setpoint; so smoother shooting behavior and more shots available.
        1. Easy to adjust due to the pressure scale, so you can do all the fine tuning yourself.
        2. Achieve the same pellet velocity with less regulator pressure.
        3. This regulator has a wide pressure range to cover all calibers.
        4. The ultra compact build will give you more regulated volume.
        5. Excellent consistency.
        6. Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
        7. It is pre-set on most common setting, and it has a clear pressure scale so you can easy adjust it to your wishes.
        8. These regulators are vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.
          1. Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze.
          2. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
          3. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.
          4. This gives our regulators a repeat cycle less than 1% difference.

        Ver todos los detalles del producto »


        Edgun Matador R3M Power
        Tune Set and Regulator By Huma-Air

        AGOTADO / PROXIMAMENTE

        Avísame cuando esté disponible:

          1. Complete Huma-Air Power tune set with regulator, XXL plenum and hammerweigh for tuning the Edgun Matador R3/R3M airrifle to the maximum performance.
          2. For the Edgun Matador R3 and R3M we have designed power tune upgrade with XXL volume plenum, Huma air tuning regulator and a special designed massive bronze hammer upgrade.
          3. This set allows you to gain maximum power out of your Matador.
          4. This tuning set replaces the complete original regulator and regulator body and is an “one on one” replacement.
          5. You can unscrew the original regulator house from the Edgun Valve House and replace it with the complete power plenum with regulator. (This model will fit until early 2017 models. You can check if your reg diameter is equal to the regulator plenum).
          6. The hammerkit can be fitted to the original rifle's hammer.
          7. Due to the small build of the Matador valve stem we strongly advice you not to exceed 140 bar maximum output pressure.
          1. The benefits of the Huma-air, Edgun Matador R3/R3M tuning regulator are:
          2. Easy adjustable regulator due to the pressure scale, so you can do all the fine tuning yourself.
          3. This regulator has a wide pressure range to cover all calibers.
          4. A XXL power volume plenum what will provide you the right cappacity of regulated air volume.
          5. The ultra compact build of the regulator will give you even more regulated volume.
          6. Excellent consistency.
          7. Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
          8. These regulators are vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.
          9. We will put in a breech sticker “Huma regulated” what you can put on your rifle.
          1. Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze.
          2. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
          3. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.
          4. This gives our regulators a repeat cycle less than 1% difference.

        Ver todos los detalles del producto »

        Edgun Matador R3M Tuning Regulator
        By Huma-Air

        AGOTADO / PROXIMAMENTE

        Avísame cuando esté disponible:

          1. Huma-Air pressure regulator with volume plenum for tuning the Edgun Matador R3 or R3M airrifle.
          2. For the Edgun Matador R3 and R3M we have designed a replacement Huma Tuning Regulator complete with a XL volume plenum.
          3. Due to our ultra compact build of our regulator you can remove the large factory regulator body and replace it with our regulator and volume plenum.
          4. The extra regulated volume what is created allows you to achieve the same pellet velocity with a lower regulator setpoint; so smoother shooting behavior and more shots available.
          5. Our regulator + plenum replaces the original regulator and is an “one on one” replacement
          6. Our regulator + plenum replaces the original regulator and is an “one on one” replacement. Just unscrew the factory regulator and regulator body and replaces it with the Huma regulator set and you are finished. (This model will fit until early 2017 models. Please check if your reg matches the picture here above)
          1. The benefits of the Huma-Air, Edgun Matador R3M Tuning Regulator are: Easy to adjust due to the pressure scale, so you can do all the fine tuning yourself.
          2. Achieve the same pellet velocity with less regulator pressure. This regulator has a wide pressure range to cover all calibers. The ultra compact build will give you more regulated volume. Excellent consistency.
          3. Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
          4. It is pre-set on most common setting, and it has a clear pressure scale so you can easy adjust it to your wishes.
          5. These regulators are vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.
          6. We will put in a breech sticker “Huma regulated” what you can put on your rifle.
            1. Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze.
            2. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
            3. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.
            4. This gives our regulators a repeat cycle less than 1% difference.

          Ver todos los detalles del producto »

          Kit Edgun Leshiy 12 ft/lbs Tuning Regulator
          Set By Huma-Air

          AGOTADO / PROXIMAMENTE

          Avísame cuando esté disponible:

            1. Huma-Air pressure regulator and tuning kit for 12 ft/lbs (16 Joule) Edgun Leshiy.
            2. Made on special request for the HFT and UK shooters. Huma Air in close cooperation with Airborne Arms NZ, developed this tune kit for the Edgun Leshiy to convert your rifle into a 12 ft/lbs (16 Joule) HFT version with an enormous shotcount.
            3. Our kit contains our micro regulator, a special plenum with a matching valve return spring, a power sleeve and a new softer hammerspring.
            4. The kit is specially designed for .177 but also works fine for .22 and it is capable of providing you an huge shotcount with the highest shot to shot consistency.
            1. Huge increase in shotcount.
              Easy to adjust due to the pressure scale, you do not need to gues, or use a reg-tester to set the pressure. This regulator comes in our special low pressure range of 60-120 bar.
              Excellent consistency.
              Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
              Tested in .177 and .22. (no test data for .25 available yet).
              (Maximum power for this model is tested @ 21 ft/lbs in .22)
            2. When you order your Huma-Air, Edgun Leshiy tuning regulator set you will receive:
              Your regulator preset to your own wishes.
              A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment.
              A delrin powersleave.
              A new valve return spring.
              A new hammer spring.
              We will include a “Huma regulated” breech sticker.

          Ver todos los detalles del producto »


          Edgun Lelya 2.0 Tuning Regulator
          By Huma-Air

          AGOTADO / PROXIMAMENTE

          Avísame cuando esté disponible:

            1. Huma-Air tuning regulator with special size plenum for tuning the Edgun Lelya airrifle. Get more power with less pressure! 
            2. For the new Edgun Lelya 2.0 there is a pressure regulator kit available.
              This set allows you to get the most power out of your Lelya with a lower regulator pressure.
            3. This tuning set replaces the complete original regulator and regulator body and is an “one on one” replacement.
            4. You can unscrew the original regulator house from the Edgun valve house and replace it with the complete power plenum with regulator.
            1. The bennefits of the Huma-Air, Edgun Lelya 2.0 tuning regulator are:
              Easy adjustable regulator due to the pressure scale, so you can do all the fine tuning yourself.
              This regulator has a wide pressure range to cover all calibers.
              A XXL power volume plenum what will provide you the right cappacity of regulated air volume.
              The ultra compact build of the regulator will give you even more regulated volume.
              Excellent consistency.
              Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
              These regulators are vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.
              We will put in a breech sticker “Huma-Air regulated” what you can put on your rifle.
            2. When you order your Huma-Air, Edgun Lelya 2.0 tuning regulator you will receive:
              Your regulator preset to your own wishes, including the XXL air plenum.
              A pressure scale in Bar on the regulator, for fine adjustment or readjustment.
              1. Huma regulators are CNC produced from high quality aluminum and bronze.
              2. To ensure a perfect product, each regulator is manually assembled, tested, and adjusted to the requested pressure.
              3. We only use high-end materials and our Belleville springs are designed for critical applications to achieve the highest repeatability.
              4. This gives our regulators a repeat cycle of less than 1% difference.

            Ver todos los detalles del producto »

            Edgun Matador R5 Tuning Regulator
            By Huma-Air

            €94,99

              1. Huma Regulator with XXL plenum for tuning the Edgun R5 airrifle.
                Tuning Regulator For The Edgun Matador R5.
              2. For the New 2018 Edgun R5 and R5M there is a regulator power tune kit avaiable.
              3. This set allows you to gain maximum power out of your R5 or R5M with lower regulator pressure.
              4. This tuning set replaces the complete original regulator and regulator body and is an “one on one” replacement.
              5. You can unscrew the original regulator house from the Edgun valve house and replace it with the complete power plenum with regulator.
              1. Easy adjustable regulator due to the pressure scale, so you can do all the fine tuning yourself.
              2. This regulator has a wide pressure range to cover all calibers.
              3. A XXL power volume plenum what will provide you the right cappacity of regulated air volume<.>
              4. The ultra compact build of the regulator will give you even more regulated volume.
              5. Excellent consistency.
              6. Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
              7. These regulators are vented to the atmosphere without any modification to your pressure tube needed so no creeping up in power.
              8. When you order your Edgun Matador R5/R5M tuning regulator you will receive:
                Your regulator preset to your own wishes, included the XXL volume plenum XXL.
              9. A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment
                We will include a “Huma-Air regulated” breech sticker.
                1. Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze.
                2. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
                3. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.
                4. This gives our regulators a repeat cycle less than 1% difference.

              Ver todos los detalles del producto »

              ES
              ES