Huma-Air pressure regulator and tuning kit for 12 ft/lbs (16 Joule) Edgun Leshiy.
Made on special request for the HFT and UK shooters. Huma Air in close cooperation with Airborne Arms NZ, developed this tune kit for the Edgun Leshiy to convert your rifle into a 12 ft/lbs (16 Joule) HFT version with an enormous shotcount.
Our kit contains our micro regulator, a special plenum with a matching valve return spring, a power sleeve and a new softer hammerspring.
The kit is specially designed for .177 but also works fine for .22 and it is capable of providing you an huge shotcount with the highest shot to shot consistency.
Huge increase in shotcount. Easy to adjust due to the pressure scale, you do not need to gues, or use a reg-tester to set the pressure.This regulator comes in our special low pressure range of 60-120 bar. Excellent consistency. Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations. Tested in .177 and .22. (no test data for .25 available yet). (Maximum power for this model is tested @ 21 ft/lbs in .22)
When you order your Huma-Air, Edgun Leshiy tuning regulator set you will receive: Your regulator preset to your own wishes. A pressure scale in Bar on the regulator, for fine-tuning or re-adjustment. A delrin powersleave. A new valve return spring. A new hammer spring. We will include a “Huma regulated” breech sticker.
A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment.
We will include a “Huma-Air regulated” breech sticker.
Easy to adjust due to the clear pressure scale, so need of a regulator tester.
This regulator comes in our middle pressure range to cover all calibers (ca 75-150 bar).
Up to 15-20% more shots with equal power because of the ultra compact build (tested in .25).
Higher accuracy of your rifle due to the elimination of the pellet speed fluctuations.
Huma Air regulators are CNC produced out of high grade aircraft aluminum and bronze. To guarantee a perfect product, every regulator is individually assembled, tested in a computerized simulation program and adjusted to the requested pressure.
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.
This gives our regulators a repeat cycle less than 1% difference.